Estes Monarch Build, #7214, Part 10, Planning Ahead For Paint & Trim

The instructions don't mention where the black paint starts on the upper end of the body. 

I assume the black paint separation mask is at the low end of the payload tube. The payload tube (catalog #031380) length doesn't come up on the Estes website.

To estimate the length - On my computer screen, I enlarged the instruction picture close to the diameter of the downscale BT-55.

The black paint area measured out at 8 1/2" from the tip of the nose cone down.

The instructions show colors and dimensions of the holographic tape trim. I'll simply half the height.

At Hobby Lobby I found some self adhesive metallic purple vinyl.

The self adhesive chrome is left over from the Estes Doorknob build. I didn't use the chrome trim on the blue "sport" version. I sometimes hang onto unused parts and trim for moments like this.

While not an exact match to the full size Pro 2 holographic trim, it's close enough for my downscale.