Estes Mini Scale Combo Pak, #0874, Tomahawk & Exocet, Build, Part 5, Joining Tubes

Always round over the corner ends of couplers for a smoother slide in the tubes.

This coupler is marked 3/8" from the ends with a center line.

The coupler is glued into the longer tube.

The shorter tube is glued on top, over the coupler.

 

The joint seam is filled with thinned CWF.

Dip a knife tip into the CWF, drag the filler bead around the seam.

Sand the joint with 400 grit on a sanding block.