John Boren from Estes R&D posted the original proposed decal pattern for the Mini Honest John on YORF a while back.
You can see the PDF HERE
All the bars are right at .25" wide.
A copy was printed and used for placement of the stripe pattern.
I used my favorite black trim material, Contact Paper for blackboards.It's been used in the past with great results and is much easier than masking.
Thinner than electrical tape trim and cheaper than trim Monokote.
You can reposition it easily and it locks down after it's been sitting on the surface for a few days.
First up, I cut a few long strips .25" wide.
No comments:
Post a Comment