UPGRADE: I showed this earlier, the tie down loop at the nose cone shoulder had a mold bubble in it. The plastic tie loop isn't very strong to begin with. I cut it off and made a stronger attachment.
A hole was drilled using a diamond file.
In the end I made it larger than what is pictured here. I had trouble feeding the shock cord through.
To make it easier to reach the shock cord a bend was put in the elastic.
It was fed through the hole and picked up with some narrow tweezers. It took a few tries to grab it.
A Duncan Uni-Knot was tied in the shock cord.
UPGRADE: A long elastic shock cord was used in place of the short rubber shock cord provided in the kit.
No comments:
Post a Comment