Model Minutes Leduc 22 Build, Part 16, Outside Body Tube

The outside tube is rolled.
Wing slots are cut and the tabs folded inside like done earlier with the inside tube.
At the bottom. slots are cut for the bottom three fins. The printed blue lines are removed.

I was happy with the way the body tube fit over the foam centering rings.
The instructions say to use a scrap piece of foam to line up the wing slots.

The triangle tabs are glued and rolled over onto the top centering ring.

Here's all the top tabs glued in place. Notice all are folded on the lines at the base of the folded triangle wedges.

The next post is where it all falls apart . . .