Enerjet by Aerotech, Arreauxbee-Hi, Part 5, Tube Prep

The lower tube had some raised overlaps under the glassine wrap. There was what looked like a dent that was filled with CWF.

Under the surface were some overlaps that looked like a raised spiral running down the tube. 

These raised spirals were carefully sanded with 220 frit on a block.

After filling the normal seams with CWF and sanding, 

I followed with some Duplicolor Filler/Primer and sanding.

You can still see the raised overlaps. The filler/primer helps, but this will need another shot and sanding. 

On the right is the upper body tube section.