Estes Black Star Voyager Build, Part 28, Fin Joint & Inside Brace

These fin braces will be seen, so they got a coat of CWF and sanding.

I still had to sand more, making the braces smaller to fit inside the joint. On the far left is the original fin size right off the balsa sheet. The brace next to it is a bit smaller for a concealed fit.

Like the inside of the fin surfaces, the outside face was blackened with the felt tip, brush pen.

I didn't use much glue, any more would make a mess trying to position this tricky fit.

The brace was pressed into place using the side of my tweezers.