The forward ring is pencil marked inside for the glue lines.
Apply the glue on the pencil lines, slide down from the top with the glue lines to the sides of the forward fins outside edge.
Turn the tube so the glue contacts the outside edge of the fins.
New Way supplies two decal sheets so you've got second chances if one of your decals doesn't cooperate during transfer.
The decals are laser printed, they might be thinner than what you are used to. There is a slight texture to the aluminum paint so they could grab in the wrong position.
Before transferring the decals onto the model, wet the position where they will be set.
The squares decals aren't evenly spaced for a wrap around. I cut them into three pieces to get even spacing between the square segments.
The grid wrap (circles and squares) fit perfectly around the BT-50 tube.
No comments:
Post a Comment