The decal bands were a little bit of a problem.
I tried to set the lower red band against the joint of the 50/55 tube.
The fillet got in the way! The end of the band wouldn't close evenly.
The decal was carefully lifted and positioned a little higher, away from the fillet.
When wrapped around the tube the ends still didn't meet up.
Is it perfect? No, but a lot better than in the first picture.
I did my best to get the black decal right up against the top of the lower BT-50 tube. We'll cover up the exposed white lip later.
The decal ends did meet up but the spacing of the white bars is uneven.
Again, close but not perfect.
No comments:
Post a Comment