Custom Solar Explorer Build Part 24 Sticker Decals

Look close and you can see the center pencil marks.

The upcoming numbered strips are being fitted into some concave joints.
These are the tough ones to place, I saved them for last after getting some practice in on the easier stickers.

My knife blade tip is set right under the center mark on the red band in the center.

Set this center mark down on the center mark already on the BT-55 tube.
Work from the center out, being sure to set the sticker in the deeper fillet areas first.
After the centers and fillet areas are stuck down, work the sticker out to the ends.

Here's how they should line up.

As mentioned earlier, double check the "2" sticker before setting them in place.
It's easy to get this one upside down.