After the single coat of Duplicolor primer/filler I noticed a glue smear.
This was easily sanded smooth. The primer/filler filled in the raised sides of the glue area.
Right above the glue area is a tube seam. You can see how the primer is left in the rut, the last bit the CWF didn't quite fill.
The first coats of white showed a slight crack where the tubes were joined together. More medium CA was applied and sanded flat to the tube surface.
Instead of shooting the entire rocket body with another coat of white, I shot some paint into a cup and used a Q-tip as a brush.
The paint was dipped and rolled over the sanded through area.
The white is just an undercoat. I wouldn't be able to do this touch-up if white was the final color.
No comments:
Post a Comment