NARAM Egg Lofter Build, Part 6, ASP 18" Parachute Kit

The parachute is "spike folded" to find its center. Mark the center point with a Sharpie.

The shroud lines are pre-cut. Even up the ends and fold at the center. Mark the center with a Sharpie.





Set the center mark on the shroud line at the center mark on the parachute.

Tape the shroud line at the corner side of the parachute.

Here you can see the marked center dot on the chute material.
Set the center mark of the shroud line directly on top of the center mark of the Mylar.

1" away from the center dot, place another tape strip over the shroud line. Place another tape strip 1" to the right of the center dot.




On the right side another tape strip is set over the shroud line at chute the "corner".

TIP: Notice the tape holding the line steady for the tape strip placement.