Be careful to keep the filler off the root edge. I brush on the CWF but stop at the edge without lapping over on the root.
Use a fingernail to remove any filler and square up the edges.
The CWF was sanded to surface.
A follow up spray of filler/primer followed.
After sanding down the filler/primer -
Notice the high point at the center of the fins. If carefully sanded, the filler/primer can help define that line one last time.
Here's how I taped the pieces down for the filler/primer and white undercoats.
If you spray from the angle in the picture, you shouldn't get any spray paint on the fin root edges.
No comments:
Post a Comment