"Hrm... the probe end (i.e. the dowel) looks a tad long to me.
I don't recall it projecting as far out when I built the model."
I thought the dowel seemed a bit long. Naoto is right!
I don't know why I cut the dowel long. I tend to follow dimensions in the instructions.
The dowel should have been 5 1/8" long. At the front the pencil mark shows that length.
The extra dowel length was cut off.
The front 1/2" was tapered but not to a needle point.
The first layer of the glue dot on the tip has been applied.
I didn't have the heart to tell you :-)
ReplyDelete