The forward ring was marked bagged separately. It is pre-drilled for the screw eye.
The screw eye is set into the hole.
Don't screw it in past the threads!
Be sure it is turned to the side so it'll fit into the body tube!
Don't screw it in past the threads!
Be sure it is turned to the side so it'll fit into the body tube!
Set the screw eye with epoxy. This is the underside view of the forward ring.
Glue the ring in place so it sits opposite the engine hook.
Looking down from the front end you can see how the screw eye is facing. Look inside the tube and you can see the top of the engine hook is opposite the screw eye placement.
No comments:
Post a Comment