Estes Orbital Transport, Kit #K-42, Part 21, Booster Decals

Double check the scramjet decal positioning before the transferring onto the model.
You would think the small end of the trapezoid shapes would face forward, but the wide end faces the front.
The applied decal (above) is correct.





Before soaking, dry wrap the decal around the BT-5 scramjet tube.

Notice the ends and where they are placed evenly on each side.





Here's the bottom view with the additional decals on the scramjet housing cover. The red stripe ends wrap over and down the sides.






There are large decals on both sides of the main fins. This is something you wouldn't see in a modern kit, coverage on all sides.