Before gluing on the centering rings,
TIP: 1 1/2 wraps of electrical tape is applied to retain the engine hook.
Start the tape wrap 1/4 turn below the engine hook.
The tape goes over the hook and completely around the tube.
Go over the hook again and finish the wrap 1/4 the way around, directly opposite the starting point.
This way you have a double wrap of tape over the hook.
Note the mount is flipped over in the second picture to show the other side.
I've mentioned this before - Why use electrical tape? It retains it's flexibility. and will last a lot longer than paper masking tape.
No comments:
Post a Comment