Estes Star Stryker Build, #3206, Part 1, Parts

 

The Arreauxbee Hi build is on hold while waiting for the hurricane and rain to clear - 

I picked this one up a few years ago.

Started it, then set it aside.

This was a boxed kit, I may have picked up at WalMart.

This one reminds me of the old Estes X-Ray.

Two sets of five fins, ten fins in total.

These will be fun to glue on, line up and fillet the close fins.

Here's the specs -

All  the parts:

The parachute isn't printed. At the time this kit was produced, there was some concerns about the ink.

You can see the fins, balsa nose cone and adapter already have a sanded filler coat of CWF. That's as far as I got previously.

Only one fin set is shown here. There are five sets of two fins.