Estes Star Stryker Build, #3206, Part 5, Filler Primer Spraying

I slid the nose cone and adapter into the clear payload tube to spray on the filler/primer. 

The clear tube was masked off.

The body tube already had a seam fill of CWF and sanding.

A shot of filler/primer followed. Slide the engine mount into a painting dowel.

The fins were held down on scrap cardboard on tape with the sticky side up.

On the left is a fin after CWF and sanding. 

On the right is a fin side after spraying with filler/primer. 

Note the fin root edges are butted up against each other to keep the primer off the gluing surface.