Downscale Carded A.S.P. Part 7, Trim and Finish

Cut out the nose cone decor piece off the 24 lb. sheet.
Glue it to the plastic nose cone using a glue stick.
(Yes, a glue stick will hold it on.)

The finished model came out pretty good. I'll have to make another with the spinnerons on the correct side. I know it should be fluorescent red/orange but this is as close as an inkjet printer will get.

You can see the spinnerons off the trailing edge of the fins.





Here's a better view of the nose cone and red decor piece.
The only paint is the silver nose cone tip.

A streamer and shock cord were installed.
It'll fly with a 1/2A3-4t or A3-4t engine.