Here's the finished parasite glider. I added some cockpit details using Contact paper blackboard material.
Some test glides required some clay weight in the front.
This glider is small! - the black under the wing could help you follow the glider flight after ejection.
To start, I'd recommend low power engines and little to no wind if you want to see the glider again!
The blue tube hold down can be temporarily taped onto the booster rocket. The low end of the staple simply hooks into the blue tube.
TIP: If you apply tape to a finished / decaled model, don't set the tape down over a decal! The tape could lift the decal when it is peeled off.
No comments:
Post a Comment