New Way N-21 Sky Fighter Build, Part 7, Rudder & Wing Gluing

The "rudders" are glued onto the bottom (note the engine hook position) centered on top of the small lugs.

On the right side picture, the gluing area was sanded for a better bond.

Looking at the bottom of the model, 

here's both of the lower fins in place.

Both of the "root edges" are centered and glued to the lugs. 

Notice the leading edge point is in line with the corner edge of the body tube.

The gluing areas of the wing sides were also sanded. The gluing area of the body tube was scraped and sanded.

One side is glued on first.

Before the glue sets up, set the other side against the root edge and adjust (slide) to get the best fit. 

Here's where we are - 

Ready for a white undercoat.