Thursday, September 15, 2022

Estes Space Shuttle Columbia Build #1385, Part 4, Engine Mount & Clay Weight




The engine hook gets a soft bend to keep the ends over the top and bottom of the engine.

Don't just bend it from the middle - 
Try soft bending it from one end to the other.






The instructions say to cut a engine hook movement notch using a knife. 

I used a rotary punch for a cleaner cut.




The instructions suggest the upper ring is glued even with the upper bend of the engine hook.

I like to overlap the upper bend of the hook. It makes a stronger mount. The upper ring did get a shallow crescent punch to fit over the engine hook.




The clay weight weighs .41 oz.
ALL the weight is used, pressed into the inside tip of the nose cone.

No comments:

Post a Comment