Piglet-sus! Build Part 3 Laminating Fins

Oops! 

I skipped Step 3 of the build! I'll post it here today, then put it into the correct build order tomorrow.

Here's the wing fin "sandwiched" over the straight edge of the cereal box cardboard you cut earlier

Note the fins aren't cut to shape yet.

Lightly coat the back, unprinted side of the fin with white glue.

Set it over the edge of the cereal box stock. Push the fin fold all the way over (in this picture push to the left) until the fold is touching the straight edge of the cereal box stock.

Lay a clean piece of paper over the three layers and burnish. Clean off any glue that squeezes out around the sides.

Here's the side you'll cut on (left) and the other overlap side. (right)

The overlap on the back gives total color coverage to both sides.