Take a look at that root edge!
I don't know what happened here. All the other masking lines looked great. I noticed some roughness at the fillet joint and ran my fingernail over the edge. The paint rolled right off!
We'll use one of the decal "bars" from the last post on the Gereric Bars and Stars decal sheet - how convenient!
Cut the left side of the decal bar right on the color line. Because this is such a thin decal, leave a little of the clear backing of the side opposite the black edge.
Lay it right into the fillet using a small slightly wet detail brush tip.
Here's the trim bar in place ready for some clear coat.
No comments:
Post a Comment