Monday, February 20, 2023

Centuri Quasar Clone Build, Kit #KC-7, Part 16, Tape Pulls




The nose cone canopy mask - 

This actually turned out pretty well. 
The catalog picture shows this canopy as red with black decal windows on it.


I use Sharpie marked Scotch tape for most of my masks.
After I mark the tape with a Sharpie, the dried ink is wiped over with a paper towel, taking off any excess.

Occasionally some of the ink gets rubbed off onto the model. It is easily cleaned off using a Mr. Clean sponge.

 Here's progress up until now - Decals are next.

3 comments:

  1. Looking Awesome, great job. Please post the decals.

    ReplyDelete
  2. That is a crazily good mask on the fins leading edge. I guess I'm going to have to try the Scotch tape approach one of these days.

    ReplyDelete
    Replies
    1. Hi Neil,
      Sometimes after lifting the tape on a sprayed leading edge, there may be some squared off edges. These are pushed back into the second color while the paint is still a bit tacky. I try not to scrape but instead "mold" the corners back to the rounded leading edge.
      When first using the Scotch tape, try a simple tube wrap mask to see what is possible.

      Delete