This clone build had a goal - to use only leftover spare parts! No purchasing, no vendor order. My substitutions shown in italic
Quasar build at right by Tim Morley, posted on YORF
Substitute Estes PNC-60H, 4 1/2" exposed,
to add 1" of tube
1 Shock Cord SC-18 16" L
Substitute 36" x 1/8" elastic
1 Shock Cord Fastener SCF-1 Self Stick
1
Not needed with Baffle top tie
Chute Pack 16" Dia.
Substitute ASP Mylar 15" chute
1 Ejection Baffle EB-16
Substitute old Semroc EB-16
1 Body Tube ST-16 7.5"L
Substitute Estes BT-60, very close!
1 Launch Lug LL-3 1/8" x 3"L
1 Balsa Sheet BFM-10 3"W x 12"L x 3/32"T
3 Body Tube ST-5 3"
Substitute Estes BT-5, same as Centuri ST-5
3 Ramjet Nose Cones N/C Fits ST-5
Made from old balsa cones, tapered dowels,
couplers and tubes
3 Ramjet Tail Cones N/C Fits ST-5 Plastic
Made from old balsa cones and Bic Pen barrel
1 Paper Shroud N/C ST-16 to ST-10 2.44 L
Print from payloadbay.com - BT-50 to BT-60
2 Centering Rings CR-1016 ST-10 to ST-16
Substitute light ply 50/60 rings
1 Sleeve Tube HTC-16 1.5"L
Substitute Estes JC-60C
1 Engine Tube (Intermediate) ST-10 4"L
Substitute BT-50 tube
1 Thrust Ring TR-7
Substitute Estes AR-520
2 Centering Rings CR-10 ST-7 to ST-10
Substitute Estes AR-2050
1 Engine Tube ST-7 3"L
Substitute Estes BT-20
1 Engine Lock EL-1
Substitute Estes EH-2
1 Corrugated Strip N/C
1 Decal Sheet N/C
Substitute Chrome Monokote Trim
Assume you’re going to lengthen the nose cone with the extra piece of tube and the coupler? Interesting - I like it!
ReplyDeleteYep! You figured it out!
Delete