FlisKits Space Raider Build, Part 5, Body Shroud

The body shroud is made up from two separate halves.

Before cutting out the pieces, score (emboss) down the fold lines.

This "butter knife" method goes back to the old Estes Saturn 1B instructions.

Emboss a line down the fold lines using a knife tip with no serrations. On this knife, the rounded tip is smooth.

It's always hard to cut the tight launch lug relief hole curves with a hobby knife.

TIP: Start the center with a small punch. Continue down the curved side cuts with your knife.  

TIP: Sometimes cardstock folds can crack the ink on a home print.

Keep it to a minimum by gently "coaxing" the fold. Don't do a hard crease at first. Work up to a sharp fold.

The two halves are joined with a glue tab.

Apply light white glue to the tab. 

Butt up the corner lines and burnish smooth.