Rocketship Games Alice's Star Rocket #R6, Part 7, Assembly

The instructions show glue rings inside the tube end for the engine mount.

The way the model is designed, the fins lock the engine mount in place. For that reason, I only applied a line of Fabri-Tac glue inside, just above the fin slots.

The Kevlar line was fed through the back of the mount. The launch lug slid through the large slot and up into the glue ring.

With the lug in the slot, all the fin slots are in line!

Fabri-Tac glue was set on the root edge of each fin and pressed through the tube slot and into the engine mount slot.

 

The rip-stop nylon Streamer is attached using the supplied sticker.