Semroc Wac Corporal Build, Part 6, Launch Lugs

On the left are the laser cut, kit supplied launch lugs. The edges are burnt and rough.

I cut new lugs from some extras I had. 

The seams in the launch lugs were filled with CWF at the same time as the body tube.

I slide the lugs onto a Q-Tip for a holder when brushing on the filler.

Leave the lugs on the holder when sanding the CWF to surface.

Some CWF filler may have gotten inside the lug edge. You don't want the lugs to get hung up on the launch rod.

Clear, clean up and round the lug by rotating a sharpened dowel in the lug ends.