The inset picture shows the line of glue just down the centerline on the underside of the raceway. The side edges won't be making contact with the round tube. I also didn't want squeeze out of glue. Any gaps will be filled with a glue fillet.
I didn't initially cut the curve to fit over the low end of the raceway.
Set the rudder over the back and trace over the raceway curve end with a pencil.
On the right is the rough cut.
After more forming with sandpaper rolled over a dowel, I got a good fit.
Follow up with some glue fillets to fill any gaps.
Great idea with the raceway. Wish I did that instead of cutting the center of the race way.
ReplyDelete