Estes Strikefighter, Kit #2015, Build, Part 15, Some Early White Paint

I shot the fairings early to better see the fillets. 

Look close - the glued edge areas are shiny, the center of the strip isn't. 

The edge fillets are sealed by the glue. the paint will seal things up, some light sanding is needed to even out the surface.

 

The core tube and vanes would be impossible to paint once they are slid into the nacelle tubes. These will also get a shot of gloss white.

I did mask the glue areas. Notice the thin strips covering the outside edges of the vanes.

After the paint dried, there were some small fillet bubbles.

Rather than squeeze the glue bottle, I applied small drips onto a toothpick tip and pressed the glue into the recess holes.