Estes Strikefighter, Kit #2015, Build, Part 28, Fin Tip Decals

These fin decals are tricky! Be sure to rub and leave some water down the leading edge and sides of the fin before transferring the decal.

Set the thick black center band down the leading edge of the fin. Hold it up to the light and you can better space the center. 

Be sure the decal corner is at the corner of the fin.

When the center is positioned, roll down the sides.

Cut the top corner close to the black ink. I cut right at the black ink and it didn't run or bleed when soaked.

This is about as good as I could get the two decals to match up!

I counted 31 decals on the sheet!