New Way Blade Runner, Part 8, Gluing On The Fins

Five fins!

The marking guide fit very well. Pencil marks were made and extended the full length of the tube.

On the right -

I used the marking guide as a height guide at the 1 1/4" mark.

The long strakes glue down the fin lines, butted up against the  top of the fins. 

For a better alignment, I used the reversed clothespins. Be careful not to glue the clamps to the fins.

To see the original post and make your own flat clamps: CLICK HERE

After the glue dried on the forward strakes,

I tried the fit of the ring tube. A perfect slip fit!

The ring tube will be glued on after the fins and strakes are painted. Otherwise, it would be very difficult to get good paint coverage with the ring glued in place.