The scratched fin glue line was slightly widened using the side of a diamond file.
Note the masking tape. That's the stop point so the scratch stops before the top of the root edge of the fin.
The lower tape is the top of the launch lug glue line.
The glue fillets are done with white glue. The white glue dries clear, yellow glue would dry yellow.
The white glue also dries with a flat finish. To gloss it up, I applied some clear acrylic using a Q-tip. No masking here -
The inside lip of the BT-55 got a wipe of super glue then light sanding with 400 grit.
The brown edge was "painted" gray with a second Q-tip.
No comments:
Post a Comment