Set down a strip of clear Scotch tape.
Draw a curve with a wide point Sharpie. Let dry, wipe off excess ink with a paper towel.
Cut a smooth arc through the middle of the ink line.
The winglets are masked of with strait pieces of tape.
Cut the curved tape in half into shorter segments.
The curve allows you to lay the tape line in a "straight" line.
The lower half of the nose cone is masked off with brown paper tape.
Here's the finished nose cone.
Scotch tape masks will give a good line if your surfaces are smooth (no fillet bubbles or balsa grain) and the tape is sealing the edges.
No comments:
Post a Comment