Wednesday, November 18, 2026

Semroc/Estes Mars Lander Build, Background

The camping trip was cancelled! Central Florida has three days of rain in the forecast. Nothing worse than a wet muddy dog on a wet, muddy hiking trail.
  
I'll be ending the blog after this build. I know, I stopped the blog once before. This time it's real. 
I figured we'll go out on a high note - 
 
I've built two Mars Lander models before. One Estes original in the early 1970s and more recently a Semroc reissue before I started this blog. 
The earliest I can find a catalog reference is in the 1969 Estes catalog. Only $4.75 cents! I don't think I would try launching it with a recommended B6-2 motor. A C5-3 might be the better choice.

Your shroud skills should be strong to tackle this build. It's a great example of the cardstock details that went into Estes kits in the late 1960s. To see the Estes instructions: CLICK HERE

The description says "spring loaded landing gear". Small, internal rubber bands were used for the landing leg movement. Rubber bands could deteriorate over time. I'll be substituting small springs. 

I'll be ending the blog after this build. I know, I stopped the blog once before. This time it's real. I figured we'll go out on a high note!
 

2 comments:

  1. I built the Mars Lander back in the day. Gonna miss your post, Been Great, Enjoy your time and keep safe.

    ReplyDelete
  2. Ah yes, those rubber bands... They *will* deteriorate over time (it may take a few years) and they will eventually need to get replaced (something that we probably don't think about when building the model). To replace the rubber bands would involve a bit of surgery on the model. As long as you only used a minimal fillet at to join the nozzle to the engine mount tube, and a minimal fillet to join the lower descent shroud to the rear bulkhead, then gaining access to the anchoring dowels might not be too difficult. Of course you still need to have a way to gain access to the interior of the descent stage so that you can fish the replacement rubber band through the back of the landing gear and out to the rear bulkhead...

    ReplyDelete