Looking ahead, I checked how straight the sides were using an aluminum angle. This will require some sanding to get the sides straight. notice the pencil mark -
The visible end edges of the intake can be cleaned up with a wipe of CA glue and light sanding. This removes the fuzz and sharpens the looks.
Don't wipe any CA glue where wood glue will follow.
I set the vertical brace in place to mask the gluing areas for the filler/primer shoot.
The underside tabs aren't tall enough to fully fill the notch! This will need some more filling after gluing the braces in. No glue yet, wait until after sanding the filler/primer.
No comments:
Post a Comment