You can use a glue stick to adhere the smaller wraps that are placed on Kraft tubing.
The motor mount tube gets a nozzle wrap. Test fit it dry - without glue to see how it is spaced around the engine hook.
The rear centering ring was blacked using some Sharpie pens.
This isn't necessary, but I wanted the launch lug seams covered.
There is plenty of white scrap left from the large wrap sheets.
Don't cover the entire lug, I leave a side open for gluing onto the main body.
This shows how thin the print wrap sheets are. Be careful, you can easily crease them.
No comments:
Post a Comment