The shroud seam was scraped and sanded to lower the tab area.
TIP: Plan ahead where the shroud seam will be. You should consider where and how the tall UNITED STATES decal will be placed. I tried to follow the instruction illustrations but with where my shroud seam is, the decals won't end up like the face card picture.
Line up the shroud seam, in line with one of the large, square fins.
The instructions are vague regarding the shroud seam. The instructions do say to cover the shroud seam with a wood tunnel.
It's a little tricky getting the angled tunnel joint to match up.
I'd recommend using a sanding block to keep the tunnel end tapers consistent.
After a few tries, the tunnel joint is about as close as I could get.
I'll still add some CWF filler to the joint crack.
No comments:
Post a Comment