TLP Pershing #K046 Build, Part 52, Charge Retainer, Part B

After cutting out the double thickness cardboard there is some raised edges.
First, roll the edges down with a burnisher.

The edges will have to be sanded flat and clean.
The edges got a run over with medium CA applied with a Q-tip.
This hardens the sides and allows for sanding with 400 grit.

There was enough of the olive drab left paint to spray the charge retainers! The can was nearly empty and sputtered some, but covered it all.

I made four and will pick the best two for the model.

Here's where the charge retainers will go after the U.S. ARMY is placed.
They will glue on right over the white lettering.