Friday, December 10, 2010

Apogee Heli-Roc Build Part 15 Self Adhesive Decor


These ares the supplied self-adhesive panels on the rotors. They look good and will help strengthen the long balsa rotors.

While the face card shows the grey panels all the way back on the trailing edges of the fins, I decided to raise them a bit

A red stripe goes around the nose cone beneath the hooks.

The rotor stops are glued in place. Before gluing, raise the blades and check their position near the body tube. Set the stops in place so the 8 degree side fully butts up over the thread wraps.

No comments:

Post a Comment