Sirius Interrogator Build Part 13, Decals

The Sirius decals transfer easily and really hug the surface well after blotting.
The instructions say to soak them for 30 seconds, mine were ready for use after just over 20 seconds.
Many of the decals are transferred in group "blocks". Be careful before you cut apart a decal that might be part of a larger area group.

As the instructions direct you - 
Set this yellow/orange decal down first. The placement of other decals rely on it's position.

Dry fit decals before soaking to be sure of how they will be centered.

The rear tube wrap has to go around the trailing dowel ends.
Mark the center with a pencil mark and set the center down first at the top engine hook side.
When the decal meets on the other side the spacing should be close.

The decals took 2:15 to apply.