Monday, July 8, 2013

Sirius Interrogator Build Part 8, Wing Gluing


The small ramjet tubes got a shot of filler/primer before assembly.
Sitting on the spraying wand - the upper tube has been sanded.


The wing dowel seams were filled with CWF.

The upper seam is dried and ready for sanding.
The lower dowel seam has been sanded smooth.

The instructions were followed to glue the wings on.

The tube is taped down. Before gluing on the wing sides, be sure the tube is straight with the penciled center line facing up.

The wing sides are glued on butted up against the 1/8" dowel.
The dihedral is automatic when the wing dowels sit flat on the work surface.

No comments:

Post a Comment