This was an interesting "hit or miss" build.
The fin unit and nose cone were the best molded plastic parts I've ever seen.
The mainframe body tube was unusable. Thin and I doubt would last through the first few flights.
The rough brown launch lug could have used a Mylar covering.
The parachute was very good and the shroud lines very strong.
Thanks to Lonnie B. for supplying the kit.
Glad to see that, as usual, you did a beautiful job building it.
ReplyDeleteNice build, My Endforcer body tube was destroyed by the ejection charge on the first fligt, right above the mount, the tube burned and only the Mylar was holding the model together. MRC replaced the wrap and I used an Estes BT50 to replace the tube. Wish I had replaced it first like you did!
ReplyDelete