Sunday, October 21, 2012

AVI Nike Tomahawk Build Part 16 Decal Draw

Just so you know, I haven't given up on the AVI Nike Tomahawk build!
The weather and my work schedule weren't good for paint and primer so I'm working on the decal drawings for now.

There are many rows of screws shown on the Peter Alway drawing.
From the top down:
One row of 12 round head Allen screws, then
Eight rows of 8 flat head slotted screws, then
Two rows of 12 flat head Phillips screwsround head Allen screws

The three styles of screws were drawn oversize in Corel Draw.
I went back and made the center recesses a lighter gray after this blog entry.

For better spacing, a 1 space by 12 space retangle box was drawn.
The (reduced) screws were set in the corners of the long divided box.
The 1 X 12 and 1 X 8 boxes are 2.50" wide, which fits aroung the upper 20mm Quest tube.

After the screws were set into the segmented box, the box was erased leaving the screws in the evenly spaced positions.

No comments:

Post a Comment