Saturday, August 3, 2019

Semroc USS Andromeda KV-97, Part 12, Lugs and Detail Pieces




Here's the rear and front launch lugs glued in place.
Some of the fin details have been glued in place. There are small positioning dots burnt into the sail fin surface. As mentioned before, mine was a pre-production kit. The dots were a little outside the border width of the detail pieces. This has also been fixed in the production kits.

Here's the back end showing the detail pieces and the toothpick antennas glued to the small fin.

On the engine tubes I've placed some masking tape pieces. This will keep the black paint out for the fluorescent interior paint later.

The entire model will be painted an overall black so no white undercoats are needed. The only white will be hand painted inside the engine tubes for the fluorescent paint to follow.

No comments:

Post a Comment