The laser cannons are made up of a 1" long 3/16" launch lug, a 1 3/16" long 1/8" lug and a 1" length of 1/8" dowel.
On the bottom of the picture is a glued-up finished laser cannon.
Draw a line down the dowels and lugs. It's not easy to keep them in line during gluing.
Use the pencil lines to get everything straight.
Mark the depth for the 3/16" lug on the 1/8" lug.
Match up the center lines and the three pieces should end up in a straight line.
Here's the two finished laser cannons.
No comments:
Post a Comment