JeffyJeep built one of these on TRF. He used a brown marker to get color coverage on all the inside surfaces. A good idea, you'd never get spray paint evenly between the three wing layers.
I decided to spray the layers separately, scrape off the paint and glue it together.
After a dry fit of the first wing layer, pencil marks were made to show where the paint would have to be scraped.
Why not mask with thin strips before spraying?
The card stock glue areas were almost too thin.
Here's some of the glue contact scraped areas.
The middle layer has been glued on and feel very strong.
The third layer was set on the middle layer and trace with a pencil. Enlarge the picture and you'll see the light pencil lines.
I'll try to concentrate the brown spray inside the pencil areas.
Little considerations like this will keep the weight down.
No comments:
Post a Comment