Whoever re-drew the decals must have been concerned about the original copyright.
They tried to change them just enough so they couldn't be called an "exact" copy.
Note the decal on the right.
The B and C letters should have their baselines turned in parallel to the root edge of the fin.
If left (and applied) like this, the word "Danger" would be upside down.
So I'll cut off the B and C letters and flip the decal.
When placing this rivet panel decal, I found it easier to press the decal into the root edge with a moistened Q-Tip.
Notice the word "Danger" is at the bottom now and isn't read upside down.
No comments:
Post a Comment